建設部舉報網站西安網站建設方案優化
組網需求
如圖1，兩個IPv6網絡分別通過SwitchA和SwitchC與IPv4公網中的SwitchB連接，客戶希望兩個IPv6網絡中的PC1和PC2實現互通。
其中PC1和PC2上分別指定SwitchA和SwitchC為自己的缺省網關。
圖1 配置IPv6 over IPv4 GRE隧道組網圖
配置思路
要實現IPv6協議中的PC1和PC2通過IPv4公網互通。需要在SwitchA和SwitchC之間建立直連鏈路，部署GRE隧道，通過靜態路由指定到達對端的報文通過Tunnel接口轉發，PC1和PC2就可以互相通信了。
配置GRE隧道實現IPv6協議互通的思路如下：
-
配置物理接口的IP地址，并配置IPv4靜態路由，實現設備可以通過IPv4網絡通信。
操作步驟
#
sysname SwitchA
#
ipv6
#
vlan batch 10 30
#
interface Vlanif10ip address 20.1.1.1 255.255.255.0
#
interface Vlanif30ipv6 enableipv6 address FC00:1::1/64
#
interface Eth-Trunk1 service type tunnel
#
interface GigabitEthernet0/0/1port link-type trunkport trunk allow-pass vlan 10
#
interface GigabitEthernet0/0/2port link-type accessport default vlan 30
#
interface GigabitEthernet0/0/3eth-trunk 1
#
interface Tunnel 0/0/0ipv6 enableipv6 address 2001:db8:1::1/64tunnel-protocol gresource 20.1.1.1destination 30.1.1.2eth-trunk 1
#
ip route-static 30.1.1.0 255.255.255.0 20.1.1.2
#
ipv6 route-static FC00:2:: 64 Tunnel0/0/0
#
return#
sysname SwitchB
#
vlan batch 10 20
#
interface Vlanif10ip address 20.1.1.2 255.255.255.0
#
interface Vlanif20ip address 30.1.1.1 255.255.255.0
#
interface GigabitEthernet0/0/1port link-type trunkport trunk allow-pass vlan 10
#
interface GigabitEthernet0/0/2port link-type trunkport trunk allow-pass vlan 20
#
return#
sysname SwitchC
#
ipv6
#
vlan batch 20 30
#
interface Vlanif20ip address 30.1.1.2 255.255.255.0
#
interface Vlanif30ipv6 enableipv6 address FC00:2::1/64
#
interface Eth-Trunk1 service type tunnel
#
interface GigabitEthernet0/0/1port link-type trunkport trunk allow-pass vlan 20
#
interface GigabitEthernet0/0/2port link-type accessport default vlan 30
#
interface GigabitEthernet0/0/3eth-trunk 1
#
interface Tunnel0/0/0ipv6 enableipv6 address 2001:db8:1::2/64tunnel-protocol gresource 30.1.1.2destination 20.1.1.1eth-trunk 1
#
ip route-static 20.1.1.0 255.255.255.0 30.1.1.1
#
ipv6 route-static FC00:1:: 64 Tunnel0/0/0
#
return